MyPot® Irrigation Kit (Without Recirculation Pump)
The MyPot Irrigation Kit (without pump) is made up of two parts: the Connection Kit, whose purpose is to connect the recirculation pump to distribute the water, and a drain kit to collect the excess water from the hydroponic tray. Pump, tank and timer are not included.
This kit is recommended to automate the watering of MyPot horizontal orchards (4 planting modules per square metre) on 1x1m or 2x1m hydroponic trays. For 4 m2 crops use two irrigation kits, one for each 2x1m tray.
MyPot irrigation kit includes:
Connection kit. It includes the necessary components to connect the submersible pump and distribute the irrigation water: 3m of microtube, 2.5 m of 12mm tube, 2 6-way connectors, 1 12mm elbow, 1 connector for the pump, a plug for the 12mm rubber, assembly instructions.
Drainage kit. It includes the necessary components to redirect the excess irrigation water to the tank: a 20mm threaded connection, 1 sliding nut, 1 O-ring and a 20mm tube.