Automatic growing table- MyPot®
KMP001
New product
Plantas Madre
Produce esquejes por un tubo!!
- Send to a friend
Vídeos
MORE INFO, GROWING TABLE
The Automatic Grow Table is composed by:
MyPot® PLANTATION MODULE: Is the plantation module of our urban garden/vegetable garden, with a capacity of up to 8 same or different plants, that will make up your urban vegetable garden or automatic kitchen garden. It is design with a safety mechanism that store up to 4L of water with nutrients. A Single hydroponic cultivation system adapted to outdoor or indoor cultivation that combines 4 pro farming techniques: substrate hydroponics, aereoponics and floating roots.
MyPot® TANK MODULE: This unit is the base of the modules of the vertical garden. It stores up to 14L of nutrient solution, which allows for great irrigation autonomy. It contains the recirculation pump that supplies water and fertilizer to the plants. It can be connected in sequence with other MyPot® tank modules and/or with a larger water reservoir, both for large agricultural installations and/or to increase the irrigation autonomy. It´s also designed to be able to install wheels (casters) to facilitate its movement and levelling legs for uneven surfaces.
MYFERTYPOT 3L: Is a well-balanced Universal Fertilizer and Chromatic pH Stabilizer (pH down) kit suitable for all kind of plants. It´s composed by Universal A (N, CaO y k2O), Universal B (P2O5, K2O, MgO, SO3, B, Mn, Zn, Cu, Fe, Mo y Ca) and Chromatic pH Stabilizer – pH down (N and P2O5). With MyFertiPot 3L kit you can prepare up to 1000L of nutrient solution. It can be used in hydroponics systems or soil.
Automatic Timer: It will allow you to program the irrigation cycles, adjusting irrigation automatically to your plant’s needs.
MICRA RECIRCULATION PUMP: This low consumption pump is responsible for raising water from inside the tank module to the top of the vertical garden, automatizing irrigation throughout the system. It pumps up to a maximum height of 180cm. More powerful pumps are available in our online store in order to pump the water to greater heights, allowing you in this way to expand the urban garden vertically by adding more MyPot® planting units, creating a Vertical Grow Table up to 2m in height.
MyPot® is watertight, that means that 99% of the water in the system is lost by evaporation through the leaves of the plants (evapotranspiration), optimizing the use of water and nutrients to the maximum. Therefore, the irrigation of the urban garden should be adjusted using the programmer/timer, to the needs of the plants.
The amount of nutrient solution consumed will increase or decrease depending on several factors such as climate or the development plants phases. In freshly planted grows it is necessary to time the recirculation at a higher frequency, because the roots of the plants are not developed yet. It is also necessary to increase the irrigation frequency during high temperatures when evapotranspiration is more intense. In these cases, we recommend programming recirculation every 2-3 hours for 15 minutes. When the temperature is cooler and / or the plants are well rooted, the recirculation frequency can be less, and gaps between irrigations can be increased, if considered necessary, for 15min every 6-24 hours, always depending on the climate and the kind of plants you are growing.
MyPot® Automatic Grow Table is presented as the easiest way to get started in our MyPot® urban hydroponic growing system. It’s composed of everything necessary to grow, from scratch, all kinds of vegetables and ornamental plants in the simplest, cleanest, most productive and economic way that exists on the market.